Learn More
Frequently Asked Questions,
Video Guides & Documentation
Frequently Asked Questions
- What are the dimensions of the Instaboil 4-in-1's tank and tap?
→ The tank's dimensions are 327mm x 210mm x 210mm. For tap measurements and clearances, please refer to this diagram.
- Do you have an aftercare service?
→ We are proud of our comprehensive after-care service. You can find full details on our terms and conditions page.
- What is the capacity of the Instaboil 4-in-1 tank?
→ The tank holds 2.4 litres, which provides 5-6 cups of boiling water before it begins to refill and start the reheat cycle.
- Does the Instaboil tap offer sparkling water?
→ Our taps do not provide sparkling water. However, we also sell a superb sparking water maker.
- What size is the countertop cut-out for the tap?
→ You need a standard 35mm cut-out for the tap. It should be positioned as close to the sink as possible, rather than near the backsplash.
- What is 'WRAS Approval'?
→ 'WRAS Approval' means a water product has undergone rigorous testing by an independent lab to confirm it meets high standards set by the Water Regulations Advisory Scheme (WRAS). This certification ensures the product will not contaminate public water supplies with harmful substances, tastes, or odours, and helps to uphold public health standards.
- How long does it take to re-boil?
→ This depends on how much boiling water has been used. A cup takes 45-60 seconds (approx.), whereas a full tank may take several minutes.
- What if we live in a hard water area with limescale?
→ Our filter is efficient in both hard and soft water areas, with a carbon block filter and a de-scaler tablet that works for limescale reduction. It is also recommended to do an anti-scale on your tap 3-4 times a year. We have a video on how to do an anti-scale procedure in the video guides (below).
- Do you install it or do we need a plumber?
→ While we do not install ourselves we have a list of recommended and experienced plumbers throughout the country. However, your own plumber should be able to install the Qmpress tap. It also comes with comprehensive installation instructions.
- How efficient is an Instaboil 4-in-1 tap when compared to a kettle?
→ Running costs on your Instaboil system are approximately 25c per day, in comparison to a kettle's consumption of approximately 55c (or more!) per day. Instaboil has a power consumption of 1.5 kW when boiling, and 0.8kW while on standby. A kettle uses power at a constant 3kW.
- Where are the taps dispatched from? Are there customs charges?
→ Qmpress is 100% Irish owned. Everything is dispatched from our warehouse in Kerry directly to you with no additional customs charges. Our taps also ship free of charge.
- What is the maintenance required for an Instaboil 4-in-1 tap?
→ The inline filter must be replaced every 6 months to maintain your two year parts warranty. Other than that there should be no additional requirement for maintenance. Filters can be purchased from our shop.
- What is your warranty?
→ We offer a 2 year warranty on parts.
- What other products do you offer?
→ Qmpress also offers superb flexi-hose taps in four different colours, with matching sink units. We also offer a waste disposal unit and a sparkling water maker. All our products can be purchased from our online shop.
Qmpress vs. cheaper alternatives
Many boiling water taps may appear similar at first glance. When you look beyond price, however, and investigate topics such as build quality, safety, longevity, and after-sales support, the differences become very clear.
- True 4-in-1 Performance
Qmpress Instaboil delivers:
• Boiling filtered water
• Cold filtered water
• Standard hot water
• Standard cold water
Key components of our Instaboil tap are sourced from Italy, and we hold a patent on our boiling hose, ensuring long-term safety and performance.
- Designed, Engineered and Supported in Ireland
Qmpress is an Irish company that designs and brands our own 4-in-1 boiling water tap specifically for the Irish market.
Many low-cost alternatives operate from the UK or further afield, often selling generic units sourced directly from China, with no physical presence or service team in Ireland.
When something goes wrong down the line, having a local company on the ground matters.
- Superior Internal Build Quality
Our system is engineered for durability and heat retention, with:
• Stainless steel outer unit
• Stainless steel internal bladder
• Specialised spray-foam insulation designed to maintain higher temperatures for longer.
Many cheaper systems heavily rely on plastic internal components and insulation, particularly around wiring and heating elements.
We strongly advise customers to research the internal materials of any boiling tap before purchasing—not just the exterior finish.
- After-Sales Support that Actually Exists
→ Boiling water taps are long-term appliances. What matters is not just how they perform today, but who will provide support for them in three, four or more years' time.
• Qmpress has operated for over 7 years.
• Over 160 positive reviews from certified customers
• A dedicated Irish support team for servicing and assistance
With many overseas operators, after-sales support can mean sending an email years later and hoping for any response.
- Premium Quality without the Premium Price
In terms of quality and performance, we confidently place Qmpress on a par with the best brand on the market.
The difference?
Because we are based in Ireland and only serve the Irish market, our price point is significantly more accessible.
- Certified & Compliant
Qmpress is WRAS Approved, providing reassurance around water safety and compliance. We always recommend customers check for proper certification, not just the CE mark, when comparing products.
- Solid Stainless Steel Taps
All Qmpress taps are manufactured from stainless steel.
Lower cost alternatives often use nickel-plated finishes, which may initially look similar, but wear over time.
In Summary
When considering cost effectiveness, price alone does not tell the full story. Quality of materials, safety certifications, engineering, and customer service all play a crucial role in long-term value.
We always encourage our customer to research the internal build quality of the products they are evaluating, read verified customer reviews, and consider who will be there to support the product in the years to come.
Qmpress has been built with longevity, safety, and Irish customers at its core.
Explore our Video Guides
- Instaboil 4-in-1 Tap → Discover True Kitchen Convenience.
- Who are Qmpress? → The people behind the innovations.
- Why should I purchase your 4-in-1 tap over a competitor's? → Advantages of choosing Qmpress Instaboil.
- Documentation
- Product Brochure
- "Your tap only goes to 98°C, why not 100°C?" → Your Important Questions Answered.
- What is WRAS Approval? → Our Dedication to High Standards.
- Is your tap efficient to run? → How Economical is a 4-in-1 Tap.
- How to Change the Filter → A Quick Guide for Easy Filter Changes.
- Descaling → A Quick Guide for Instaboil Descaling
Quick Guides
- Using the Instaboil Tap → Experience the convenience of the Instaboil Tap.
- Setting the Instaboil Boiler → How to operate the controls on the Instaboil Boiler unit.
Instaboil 4-in-1 Tap
Discover True Kitchen Convenience
Who are Qmpress?
The people behind the innovations
Why should I purchase your 4-in-1 tap over a competitor's?
Advantages of choosing Qmpress Instaboil
"Your tap only goes to 98°C, why not 100°C?"
Your Important Questions Answered
What is WRAS Approval?
Our Dedication to High Standards
Is your tap efficient to run?
How Economical is a 4-in-1 Tap
How to Change the Filter
A Quick Guide for Easy Filter Changes
Descaling
A Quick Guide for Instaboil Descaling
Using the Instaboil Tap
Experience simplicity and convenience when correctly operating your Instaboil 4-in-1 Tap.
Setting the Instaboil Boiler
A demonstration on how to effectively operate the temperature controls on the Instaboil Boiler unit.
Book a FREE 1-to-1 Consulation
Qmpress Premier Taps and Sinks
To get more information about our class-leading 4-in-1 Instaboil system just fill in the form and we will contact you in person for a one-to-one consultation, at no additional charge.
Qmpress is Ireland's Instaboil Expert
Qmpress Ltd. is an Irish-owned company, supplying highest-quality smart-technology boiling water taps and accessories at affordable prices.
Our mission is to manufacture and supply products with exceptional quality, chic design, and safety. All our products are efficient and environmentally sustainable.
No more waiting for the kettle to boil, and no more realising that the kettle hasn't got enough water. Conveniently fill your cup or pan directly from the spout to save time and effort. Boiling hot water taps streamline your worktop and dispense either cold or boiling-hot filtered water—or cold and hot water directly from the mains water supply. Therefore you have one tap that replaces not just the kettle, but traditional kitchen taps too!
It's perfect if you desire a minimalistic, contemporary kitchen, or have limited worktop space in your kitchen.
Book a FREE 1-to-1 Consulation
Qmpress Premier Taps and Sinks
To get more information about our class-leading 4-in-1 Instaboil system just fill in the form and we will contact you in person for a one-to-one consultation, at no additional charge.
All Qmpress products are CE Approved. Our Instaboil boiler is also WRAS approved.
